In preparation of cleaning, carefully remove the glass attachment before unscrewing the atomizer. Also be sure to let the bowl cool down prior to removing the atomizer from the base.
1. Clean carb cap and glass by soaking in Isopropyl Alcohol (99% preferred). Be sure to rinse with water after.
2. Atomizer can be cleaned by submerging fully assembled part in Isopropyl Alcohol (99% preferred). DO NOT RINSE WITH WATER, AS WATER EXPOSURE TO CERAMIC CAN POTENTIALLY DAMAGE THE PART. Be sure to clean the gold connector pin on the base and bottom of atomizer with Iso soaked cotton swab as well.
*IF YOUR BOWL CANNOT BE EASILY REMOVED, DO NOT ATTEMPT TO FORCEFULLY REMOVE. See extended cleaning instructions via Puffco.com/pages/support or contact support via Puffco.com/warranty.
3. WARNING: After cleaning, allow all parts to thoroughly dry before use.• Before removing atomizer, make sure bowl has cooled down.
• Do not get base wet – its electric – it will break.
• Thoroughly clean device every 20 uses or so.
Comments
0 comments
Article is closed for comments.